Plug Cover for 12V 2.1×5.5mm with screw terminal #3DThursday #3DPrinting

Plug Cover for 12V 2 1x5 5mm with screw terminal by hdiessner Thingiverse

Shared by hdiessner on Thingierse:

If you have low voltage 2.1×5.5mm plugs with screw terminals and want to cover the wires / screws, you might find this cover useful.
I bought a bag of these plug adapters online, the size is 12x14mm. The cover just slides over the screw terminal and stays there just from friction (no additional fixture necessary). If you pull with some force, of course it will go off again. If you want to prevent that just use a litte bit of (hot) glue.

I printed it with TPU (flex), with 8% of infill (but as the walls as only 1mm thick, this might be neglegible). No harsh overhangs, so I didn’t need any supports to print.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!


Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Join 35,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Follow Adafruit on Instagram for top secret new products, behinds the scenes and more https://www.instagram.com/adafruit/

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — Moving manufacturing out of China

Wearables — Zip it, zip it good

Electronics — When to opt for alkaline batteries

Python for Microcontrollers — Python on Microcontrollers Newsletter: Arduino 2.0, Podcasts and much more! #CircuitPython @micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — BBQ Smoker, Emoji Telegraph, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 9/21/2022 Featuring Adafruit ENS160 MOX Gas Sensor – Sciosense CCS811 Upgrade – STEMMA QT / Qwiic

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.