We’ve got the New nEw NEW for you right here:
NEW PRODUCTS THIS WEEK
1.8″ Color TFT LCD display with MicroSD Card Breakout – ST7735R
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!
Adafruit 1.3″ 240×240 Wide Angle TFT LCD Display with MicroSD – ST7789
We’ve been looking for a display like this for a long time – it’s so small only 1.3″ diagonal but has a high density 260 ppi, 240×240 pixel display with full-angle viewing. It looks a lot like our 1.44″ 128×128 display, but has 4x as many pixels and looks great at any angle. We’ve seen displays of this caliber used in smartwatches and small electronic devices but they’ve always been MIPI interface. Finally, we found one that is SPI and has a friendly display driver, so it works with any and all microcontrollers or microcomputers!
OLED Breakout Board – 16-bit Color 1.5″ w/microSD holder – EYESPI Connector
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our big 1.5″ color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.5″ diagonal and contains 128×128 RGB pixels, each one made of red, green and blue OLEDs. Each pixel can be set with 16-bits of resolution for a large range of colors. Because the display uses OLEDs, there is no backlight, and the contrast is very high (black is really black). We picked this display for its excellent color, this is the nicest mini OLED we could find!
Mini Analog Thumbstick – Similar to Joycon Style
Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckily we’ve got a low-cost, quality Mini Analog Thumbstick (Joycon Style) to fulfill your directional analog input needs!
Raspberry Pi RP2040 Microcontroller Surface Mount Chips – Reel of 3400 – 73.5 cents each
The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they’ve done the same for microcontrollers with the release of the powerful new chip, the Raspberry Pi RP2040. We’ve used this chip in a bunch of breakouts and dev boards, but perhaps you want to use it too? Now these are available in a whole honkin’ reel for prototyping and development.
Raspberry Pi RP2040 Microcontroller – Surface Mount Chips – 100 Pack
The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they’ve done the same for microcontrollers with the release of the powerful new chip, the Raspberry Pi RP2040. We’ve used this chip in a bunch of breakouts and dev boards, but perhaps you want to use it too? Now these are available in packs of 100 at a great discount for prototyping and development.
ScoutMakes FM Radio Board – STEMMA QT / Qwiic
The ScoutMakes FM Radio Board is a great way to learn about the world of electronics. It is an I2C breakout board for the RDA5807 FM radio chip by RDA Microelectronics. The board supports Arduino and CircuitPython. Libraries and example code are provided to help you get started. The board also has connectors which support SparkFun’s Qwiic and Adafruit’s STEMMA QT I2C connector standards, JST-SH 4-pin.
Adafruit IoT Button with NeoPixel BFF Add-On for QT Py and Xiao
Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power – and now we have a way for you to quickly add a chunky 12mm tactile button with a NeoPixel. It’s an excellent way to create simple ‘IoT Button’ type projects with basic interactivity.
Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor – STEMMA QT / Qwiic
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C interface for easy reading. The SHT45 sensor is the fourth generation (started at the SHT10 and worked its way up to the top!). The SHT45 has an excellent ±1.0% typical relative humidity accuracy from 25 to 75% and ±0.1°C typical accuracy from 0 to 75 °C.
New Products 1/4/23 Featuring #Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor!
Visit www.adafruit.com/new for more info.