Atomykatt shares:
CAUTION! – The model will not fit any standard watertight cable collet. Read instructions below:
The thread pitch is metric 1.25
Measure your collet thread diameter (outside) in mm.
Use the formula to determine the scaling factor: ([your_diameter]/1.3)*100. round UP to the nearest integer.
Place the model with the threaded holes face on the build plate and scale with your result above only on X and Y so to preserve the thread pitch.
I have not tested with scaling for different thread pitches but should work with the sampe principle, only scaling just Z.
download the files on: https://www.thingiverse.com/thing:5652972
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
