#NewProducts 1/25/23 Featuring #Adafruit ESP32-S2 Reverse #TFT Feather! @adafruit

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


Adafruit Metro Mini 328 V2 – Arduino-Compatible – 5V 16MHz – STEMMA QT / Qwiic: The V2 is a significant redesign, enough, so we consider it a completely new product. It still features the ATmega328 chip and is drop-in compatible with the original METRO Mini, but has many upgrades and improvements

Read more


Woven USB A Cable with Magnetic Tips – Micro B, Type C, and iOS – 2 meters long: Some days we’re feeling extra fancy here at the ‘fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable.

Our latest addition to the collection is this 2-meter-long Black Magnetic USB A with Magnetic Tips for USB C, Lightning / iOS, and USB micro B! It’s a luxurious cable that will make managing lots of dev boards or gadgets super easy.

The ‘host part’ of the cable has a USB A end and a dummy end that lets you swap the magnetic tips.

Read more


Woven USB A Cable with Magnetic Tips – Micro B, Type C, and iOS – 1 meter long

Read more


ESP32-C6-WROOM-1-N4 Engineering Module – 4 MB Quad SPI Flash – PCB Antenna: ESP32-C6-WROOM-1-N4 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It’s pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices!

This module comes with 4MB SPI Flash

Read more


ESP32-C6-WROOM-1-N8 Engineering Module – 8 MB Quad SPI Flash – PCB Antenna: ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It’s pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices!

This module comes with 8 MB Quad SPI Flash memory.

Read more


ESP32-C6-DevKitC-1-N8 – 8MB SPI Flash: The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions.

This version is equipped with the ESP32-C6-WROOM-1 with 8MB Flash.

Read more


Adafruit ESP32-S2 Reverse TFT Feather: Like Missy Elliot, we like to “put our [Feather] down, flip it and reverse it” and that’s exactly what we’ve done with this new development board. It’s basically our ESP32-S2 TFT Feather but with the 240×135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we’ve also got some space for 3 buttons to go along. It’s like an all-in-one display interface dev board, powered by the fantastic ESP32-S2 WIFI module.

This feather comes with native USB and 4 MB flash + 2 MB of PSRAM, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means it’s awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.

Read more

Stay in the loop at Adafruit.com/New!

NewImage 43 1 1 1

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


3055 06New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.