3D Hangouts – TRON Disk, Star Fragment Lamp and Shoe Organizer

3D Hangouts – TRON Disk, Star Fragment Lamp and Shoe Organizer

This week @adafruit we’re 3D printing a prop inspired by TRON! Prototyping a Star Fragment lamp with NeoPixels and QT Py ESP32 inspired by Zelda and Animal Crossing. Timelapse this week featuring a shoe organizer designed by Jordi Gordillo

Learn Guide: https://learn.adafruit.com/trondisc

YouTube Video
https://youtu.be/KSvqVOXgWSk

Feather Bluefruit nRF52840
https://www.adafruit.com/product/4062

PropMaker FeatherWing
https://www.adafruit.com/product/3988

Side-lit NeoPixel Strip
https://www.adafruit.com/product/3636

Mini Skinny NeoPixel Strip
https://www.adafruit.com/product/2964

Mini Oval Speaker
https://www.adafruit.com/product/3923

2200mah Battery
https://www.adafruit.com/product/1781

Neodymium Magnets
https://www.adafruit.com/product/9

QT Py ESP32 S2
https://www.adafruit.com/product/5325

BFF NeoPixel Driver
https://www.adafruit.com/product/5645

NeoPixel Stick
https://www.adafruit.com/product/1426

Timelapse Tuesday

Shoe Organizer By Jordi Gordillo
https://www.thingiverse.com/thing:5842840
https://youtu.be/_98n6opkDso

Community Makes:

This Week

https://www.printables.com/model/7271-heat-set-insert-press/comments/704786
https://www.thingiverse.com/make:1091764 zelda guardian sword
https://www.thingiverse.com/make:1091297 star trek combadge
https://www.printables.com/model/7153-talking-d20/comments/695687
https://www.printables.com/model/7271-heat-set-insert-press/comments/691345
https://www.printables.com/model/7271-heat-set-insert-press/comments/643578
https://www.printables.com/model/32382-mini-usb-fume-extractor/comments/641603
https://www.printables.com/model/7163-dodecahedron/comments/639570
https://www.printables.com/model/7262-pyportal-case/comments/638626
https://www.printables.com/model/7172-pokemon-potion-usb-battery/comments/636354
https://www.printables.com/model/113360-elf-earbud-holders/comments/631012
https://www.thingiverse.com/thing:5865738 heat set rig remix
https://www.printables.com/model/7204-pumpkin-skull-remix/comments/674175
https://www.printables.com/model/7145-mario-boo/comments/672757


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!







Halloween season is here!
Halloween season is here! Check out all the posts, gift guides, and more!

Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — NEW PRODUCT – Adafruit RP2350 22-pin FPC HSTX to DVI Adapter for HDMI Displays

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: Adafruit Grand Opening, Profile MicroPython Memory and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi — Classic editor

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Garden Lights, Bluetooth 6.0, and more!

Maker Business – Adafruit Daily — A look at Boeing’s supply chain and manufacturing process

Electronics – Adafruit Daily — When do I use X10?

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.