A classic mac emulator: SheepShaver #MARCHintosh #Emulation #Mac

SheepShaver is a MacOS run-time environment for BeOS and Linux that allows you to run classic MacOS applications inside the BeOS/Linux multitasking environment. This means that both BeOS/Linux and MacOS applications can run at the same time (usually in a window on the BeOS/Linux desktop) and data can be exchanged between them.

If you are using a PowerPC-based system, applications will run at native speed (i.e. with no emulation involved). There is also a built-in PowerPC emulator for non-PowerPC systems.

SheepShaver is distributed under the terms of the GNU General Public License (GPL). However, you still need a copy of MacOS and a PowerMac ROM image to use SheepShaver. If you’re planning to run SheepShaver on a PowerMac, you probably already have these two items.

Supported systems

SheepShaver runs with varying degree of functionality on the following systems:

  • Unix with X11 (Linux i386/x86_64/ppc, NetBSD 2.x, FreeBSD 3.x)
  • Mac OS X (PowerPC and Intel)
  • Windows NT/2000/XP
  • BeOS R4/R5 (PowerPC)

See more on the project website and GitHub.

Tutorial – E-Maculation – Information and support for SheepShaver and other Mac emulators


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.