A low cost USB3 loop out HDMI capture card #Video #HDMI #DVI
Yuzuki Hardware has developed the Yuzuki Loop Out HDMI Capture Card PRO, a low cost USB3.2Gen1 HDMI-USB Video Acquisition With Loop Out (Loop Out HDMI Capture Card), based on MS2130 and MS9332 + MS8003.
MS2130 is a USB 3.2 Gen 1 high-definition video and audio acquisition chip, which is internally integrated with USB 3.2 Gen 1 Device controller, data transceiver module, and audio and video processing module. The MS2130 can transmit the audio and video signals input by HDMI to a PC, smartphone, or tablet for preview or collection through the USB 3.2 Gen 1 interface. The MS2130 output supports YUV422 and MJPEG modes, and is compatible with Windows, Linux, Android and Mac OS systems. Support OBS Studio, Camera, and FFmpeg.
Support HDMI 4Kx2K@30Hz and HDMI 2.0, YCbCr420 4Kx2K@60Hz Loop Out
Full height HDMI x 2
Compatible with DVI 1.0
Support YUV&JPEG output
Compatible with UVC 1.0, UAC 1.0
Support audio capture
Support video capture
Maximum video input 3840×2160@30
The highest output resolution is 4096×2160@15
Support 1920×1080@60
Support Windows 7 Above, macOS 10 and later, Linux, Android and so on
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: Open Hardware is In, New CircuitPython and Pi 5 16GB, and much more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
