Browse through all that’s new here!
NEW PRODUCTS THIS WEEK
PCB Coaster with Adafruit Logo, Aluminum and Gold: You’ve been burning the midnight oil cobbling your latest maker project. Wait, what time is it? Whether you’re a night owl (like Minerva!) or an early bird getting the worm, don’t forget to stay hydrated as a beverage goblin should! And what better way to keep your workspace free of condensation stains than with this durable and elegant PCB Coaster featuring the Adafruit Logo!
Panel Mount Kit for Raspberry Pi Camera Module 3: Mounting these tiny yet awesome cameras onto thick wood and other brittle, cumbersome materials is just not fun!
…and that’s why the folks at The Pi Hut came up with this little affordable Camera Mounting Kit! A quick, easy and forgiving way to mount your camera module (not included) with clean results!
Adafruit ADXL343 + ADT7410 Sensor FeatherWing: Upgrade any Feather board with motion and precision temperature sensing, with this all-in-one sensing FeatherWing. It sports two fantastic sensors from Analog Devices: an ADXL343 triple-axis accelerometer and an ADT7410 precision temperature sensor.
Both sensors are connected over the shared I2C bus, so you can use it with any and all Feathers! We also break out the interrupt pins and address-selection jumpers in case you want multiple Feathers or have I2C address conflicts. We’ve got both Arduino (C/C++) and CircuitPython libraries available so you can use it with any Feather board and get data readings in under 5 minutes.
Adafruit Metro ESP32-S2: What’s Metro shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices, and a Lipoly charger circuit? What has your favorite Espressif WiFi microcontroller and lots of memory for your next IoT project?
That’s right – its the new Adafruit Metro ESP32-S2! With native USB and a load of PSRAM this board is perfect for use with CircuitPython or Arduino, to add low-cost WiFi while keeping shield-compatibility.
USB / DC / Solar Lithium Ion/Polymer charger – Rev C: Make your projects to go green this summer with our specialized USB/Solar Lithium Ion Polymer Battery charger! This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers. We’ve spent over a year testing and tinkering with this charger to come up with a plug and play solution to charging batteries with the sun and we’re really pleased with what we ended up with.
Please note: we now have a newer, easier, and cheaper design for solar charging – check out the bq24074-based Adafruit Universal USB / DC / Solar Lithium Ion/Polymer charger! It has more input protection and wider voltage range, no need for a large capacitor, USB C, and more. We’ll continue stocking this older design for folks who need it. For new Solar charging projects, please use the bq24074.
Floppy Disk Costumes for SD Cards by Charlyn Gonda: Coder by sunlight, maker by moonlight, friend-of-the-Fruit Charlyn Gonda was inspired by Ladyada’s floppy disk blogging to get crafty. Now we are so pleased to carry her impossibly cute sticker sheets of Floppy Disk Costumes for SD Cards! It’s like vintage cosplay for your little storage friends.
Adafruit RP2040 Feather ThinkInk with 24-pin E-Paper Display – STEMMA QT: Easy e-paper and RP2040 finally come to your Feather with this Adafruit RP2040 Feather Think Ink that’s designed to make it a breeze to add almost any common e-Ink/e-Paper display. Chances are you’ve seen one of those new-fangled ‘e-readers’ like the Kindle or Nook. They have gigantic electronic paper ‘static’ displays – that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!Does not come with an EInk display or extension cable! For use with just about any EInk display with a 24-pin FPC connector.
New Products 4/19/23 Feat. Adafruit RP2040 Feather ThinkInk with 24-pin E-Paper Display – STEMMA QT!
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter