3D Hangouts – Feather USB Host, Canary Light, Bo Katan Headband, Storage Box, Figment and Bowser Ring

3D Hangouts – Feather USB Host, IoT Canary Light, Storage Box and Bowser Ring
https://www.youtube.com/watch?v=JL5dk8GRWrk

This week @adafruit we’re making a snap fit case for Feather USB Host. Prototyping an IoT canary night light and an LED headband inspired by Bo Katan. Checking out a print in place storage box for flash cards. Time lapse this week features a bowser ring by Stanislav Kuleshow.

Learn Guide
https://learn.adafruit.com/case-for-feather-rp2040-usb-host

Feather RP2040 USB Host
https://www.adafruit.com/product/5723

QT Py ESP32 S2
https://www.adafruit.com/product/5325

NeoPixel 5×5 Grid BFF
https://www.adafruit.com/product/5646

Miniature Wired LEDs
https://www.adafruit.com/product/5489

Floppy Disk Costumes for SD Cards
https://www.adafruit.com/product/5713

3D Parts Library on GitHub –
https://github.com/adafruit/Adafruit_CAD_Parts

Timelapse Tuesday

Bowser Ring By Stanislav Kuleshow
https://www.thingiverse.com/thing:5988387
https://youtu.be/-hZU9c0ONwo

Figment By Steve Solomon
https://www.thingiverse.com/thing:4892691
https://youtu.be/agFoBDvfi5Q

Community Makes

https://www.thingiverse.com/make:1103422 halo sword
https://www.thingiverse.com/make:1103371 led torch
https://www.thingiverse.com/thing:5997876 hylian shield
https://www.printables.com/model/7271-heat-set-insert-press/comments/809347

https://www.printables.com/model/7195-zelda-breath-of-the-wild-guardian-sword-with-neopi/comments/801580
https://www.printables.com/model/7145-mario-boo/comments/801101
https://www.printables.com/model/120649-chief-tusken-raider-staff/comments/802642
https://www.printables.com/model/7159-halo-energy-sword/comments/782274
https://www.printables.com/model/438307-air-quality-monitor-aqi-pmsa/comments/784045
https://www.thingiverse.com/make:1098767 iPhone case
https://www.thingiverse.com/thing:5968043 C02 Monitor case remix
https://www.thingiverse.com/thing:5968883 Feather case remix
https://www.printables.com/model/7215-iphone-x-case/comments/794285
https://www.printables.com/model/7260-raspberry-pi-zero-stand/comments/807421


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!






Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.