3D Hangouts – Canary Light,Ultra Hand, Foldable Case, Adabot and Korok Planter #3DThursday #3DPrinting

3D Hangouts – Canary Light, Foldable Cases, Ultra Hand, Adabot, Benchy Storage and Korok Planter
https://www.youtube.com/watch?v=WyrhWDReem8

This week @adafruit we’re checking out the IoT canary night light. Prototyping the Ultra Hand from Zelda TOTK and an all new Adabot RP2040. Layer a Layer returns with a foldable snap fit case featuring live hinges. Timelapses this week feature a Benchy with built-in storage designed by Toma3D and a Korok planter designed by PLA-n-PA.

Canary Light Learn Guide –
https://learn.adafruit.com/canary-nightlight/

QT Py ESP32-S3 –
https://www.adafruit.com/product/5426

5×5 NeoPixel Grid BFF –
https://www.adafruit.com/product/5646

LED Noodles –
https://www.adafruit.com/product/5507

Snap Fit Case for Washi Tape –
https://www.printables.com/model/488617-snap-fit-case-for-washi-tape/

Layer by Layer – Foldable Snap Fit Case –
https://youtube.com/live/8zwEyZs0kdE

Timelapse Tuesday

Korok Planter By PLA-N-PA
https://cults3d.com/en/3d-model/art/markar-planter-mmu-and-single-extuder
https://youtu.be/mHkc0kObXys

3D Benchy Storage By TOMA3D
https://cults3d.com/en/3d-model/tool/3dbenchy-v2
https://youtu.be/wZw6-ie1kzg

Community Makes:

This Week

https://discord.com/channels/327254708534116352/334905778857050125/1100479602234761246 darksabers
https://www.thingiverse.com/make:1108406 Fix It Felix Hammer
https://www.printables.com/model/289586-scifi-led-lantern/comments/883909
https://www.thingiverse.com/make:1107866 on-air sign
https://www.printables.com/model/7143-adabot/comments/884591 adabot make
https://www.printables.com/model/482760-epcot-spaceship-earth/comments/868975 epcot ball
https://www.printables.com/model/7260-raspberry-pi-zero-stand/comments/872922 pi stand
https://www.thingiverse.com/make:1107021 mario boo planter
https://www.printables.com/model/438307-air-quality-monitor-aqi-pmsa/comments/859964 wearable aqi air sensor
https://www.printables.com/model/307032-disney-magic-band-reader/comments/859932 magic band reader
https://www.printables.com/model/52514-darksaber/comments/866512 darksaber make
https://www.printables.com/model/7161-nefertiti-bust-hollow/comments/855611 nefertit bust make


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!




Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.