p1mrx shares:
This PrusaSlicer project cuts the original 3DBenchy.stl into parts, using 100% infill density for the aft hull and 10% lightning infill elsewhere. The resulting model floats upright when printed in PLA. This version is under 9 grams, but some of my previous test prints were over 12 grams and just barely floated, so there are many solutions to this problem.
I used PrusaSlicer 2.6 because its “center of gravity” visualization is somewhat useful.
download the files on: https://www.thingiverse.com/thing:6076719
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
