Browse through all that’s new here!
NEW PRODUCTS THIS WEEK
Adafruit “My Little Hacker” ESP32-S2 Development Board: Coming soon! Sign up to be notified when we put this in stock
This board is great for designing an audio player that also has WiFi support! The ESP32-S2 module has WiFi and 4 MB flash, 2 MB PSRAM – we pair it with a microSD card that can hold any length audio files and an I2S amplifier that can drive up to 3 Watt 4 or 8 ohm speakers.
>Read more
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT: The ESP32-S3 has arrived in QT Py format – and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Now we even have this powerhouse of a board with built in 2 Megabytes of PSRAM for when you need to buffer large datasets in memory.
Raspberry Pi Pico WH – Pico Wireless with Headers Soldered: Raspberry Pi Pico WH is just like the classic Pico but adds pre-soldered headers, a new 3-pin debug connector, and an on-board single-band 2.4GHz wireless interfaces (802.11n) using the Infineon CYW4343 while retaining the Pico form factor.
JST SH 1mm Pitch 3 Pin to Socket Headers Cable – 100mm long: If you’re fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST SH connector on one end, and 0.1″ pitch socket connectors on the other.
JST SH Compatible 1mm Pitch 3 Pin to Premium Male Headers Cable – 100mm long: If you’re fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST SH connector on one end, and 0.1″ pitch plug connectors on the other.
JST GH 1.25mm Pitch 6 Pin Cable – 100mm long: This cable is a little over 100mm / 4″ long and fitted with JST-GH compatible 6-pin connectors on either end.
We dig the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily, and the wires are even color coded! These would go great with SEN54 or SEN55 all-in-one air quality sensor modules from Sensirion
PlayStation Extension Cable – Compatible with PS1 and 2 – 2 Meters: Ostensibly this extension cord was originally designed to allow PlayStation game players to be able to sit across the room from their game system, but what we are using it for is to connect to PS controllers and accessories without soldering directly to cables or cutting the connectors off. Since the connector is proprietary, it isn’t like you can get a socket or plug from your local electronics shop.
Adafruit Sensirion SHT41 Temperature & Humidity Sensor – STEMMA QT / Qwiic: Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. The SHT41 sensor is the fourth generation of I2C temperature and humidity sensor from Sensirion. (They started at the SHT10 and worked its way up to the top!). The SHT41 has an excellent ±1.8% typical relative humidity accuracy from 25 to 75% and ±0.2 °C typical accuracy from 0 to 75 °C.
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
