Spice up your Feather project with a beautiful 2.4″ touchscreen display shield with built in microSD card socket. This TFT display is 2.4″ diagonal with a bright 4 white-LED backlight. You get 240×320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128×64 display. As a bonus, this display comes with a resistive touchscreen attached to it already, so you can detect finger presses anywhere on.
The Adafruit 2.4″ TFT FeatherWing guide has been updated for rev B of the board. As of Oct. 11, 2023, we’ve updated this hardware to use the TSC2007 instead of the discontinued STMPE811 touchscreen controller. The screen and micro SD card are the same but any touchscreen code will need to be updated to use our Arduino or CircuitPython library. We’ve also updated the reset button to be right-angle and added a STEMMA QT port. Lastly, we’ve also updated it with Adafruit Pinguin to make a lovely and legible silkscreen. We have a new Pinouts page, new Arduino example, new CircuitPython example and updated resources on the Downloads page.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: A New Arduino MicroPython Package Manager, How-Tos and Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey