3D Hangouts – IoT Filament Sensor, Trinkey Case and Timelapses #3DThursday

3D Hangouts – Iot Filament Sensor, Pixel Trinkey Case and Timelapses
https://www.youtube.com/live/_y8uMicT3yQ

This week @adafruit we’re back with new projects. Our learn guide this week is a IoT filament sensor using an optical IR breakout and an LED warning alarm buzzer. Spinning up a new case for the Pixel Trinkey. Catching up on several time lapses and community makes.

Learn Guide:
https://learn.adafruit.com/iot-filament-sensor/

YouTube Video
https://youtu.be/tlKvEJ8serE

TCRT1000 Optical Sensor
https://www.adafruit.com/product/5913

LED warning alarm buzzer
https://www.adafruit.com/product/5134

Feather ESP32-S2
https://www.adafruit.com/product/5000

QT Py ESP32-S2
https://www.adafruit.com/product/5325

Pixel Trinkey
https://www.adafruit.com/product/5953

Raspberry Pi Pico RP2040
https://www.adafruit.com/product/5525

PiCowBell Camera (160 Wide Angle Lense)
https://www.adafruit.com/product/5947

PiCowBell Tripler
https://www.adafruit.com/product/5967

Timelapse Tuesday

Screw Mechanism Gear By henryseg
https://www.printables.com/model/519173-screwscrew-gearing
https://youtu.be/d9YDdPkS_mQ

MX Key Toad By MorphNest3d
https://youtu.be/4HR2Z7ug6sQ
https://www.thingiverse.com/thing:6648465

Community Makes

https://www.printables.com/model/7260-raspberry-pi-zero-stand/comments/1889438
https://www.printables.com/model/887330-usb-media-dial/comments/1872616
https://www.printables.com/model/887330-usb-media-dial/comments/1869949
https://www.printables.com/model/922410-usb-media-dial-stronger
https://www.printables.com/model/913724-epcot-spaceship-earth-with-center-pillar-removed
https://www.printables.com/model/914045-warhammer-chaos-keyblade
https://www.printables.com/model/7180-tower-storage/comments/1875841
https://discord.com/channels/327254708534116352/334905778857050125/1249233820146733117


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Feather or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!









Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 11/15/2024 Featuring Adafruit bq25185 USB / DC / Solar Charger with 3.3V Buck Board! (Video)

Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: CircuitPython 9.2.1, What is DMA, PyConUS 2025 and More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

Adafruit IoT Monthly — Halloween, WiLo, and more!

Maker Business – Adafruit Daily — Checking in on Intel

Electronics – Adafruit Daily — Probe Compensation

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.