Browse through all that’s new here!
NEW PRODUCTS THIS WEEK
Adafruit DS2482S-800 8 Channel I2C to 1-Wire Bus Adapter – STEMMA QT / Qwiic: Coming soon! This is a DS2482S-800 Stemma QT board that uses a I2C-to-1W controller chip, with 8 selectable channels, built-in parasitic-power-pullups, adjustable I2C address and a wide operating voltage range! You can easily connect it to an existing I2C bus and then use the breakout pads to attach multiple DS18B20’s, or pair it with our 1-Wire chaining breakouts for fancier experimentation.
Bus Pirate 5 Base Kit with Bus Pirate 5 PCB and Enclosure: Bus Pirate 5 is the latest edition of the original universal serial interface trusted by hackers since 2008. We’ve stocked and loved the Bus Pirate 4 for years and are excited to see the latest and greatest from the minds at WhereLabs.
The Bus Pirate is an open-source hardware debugging tool that converts simple commands into common bus protocols such as 1-Wire, I2C, SPI, UART, several LEDs and more. Send commands to a chip or sensor and get the response, without writing a line of code.
Bus Pirate 5 Probe Cable Set: This luxurious accessory will make your Bus Pirate 5 a joy to use. This keyed and locking probe cable made of premium soft and flexible silicone-coated wire connects to the Bus Pirate 10-pin main header. The ends are 2.54mm Dupont connectors that fit many different types of probe hooks, as well as custom-milled breadboard adapter pins. Silicone covered wires means it wont kink or crack and will survive if it touches your soldering iron
Bus Pirate 5 SOIC / SOP8 SPI Flash Adapter: This accessory for the Bus Pirate 5 makes it trivial to program bare flash memory chips without clips or soldering. SOP8 150mil and 208mil are the most common and inexpensive flash packages at the moment. After looking at a number of sockets, the folks behind the Bus Pirate 5 decided these bad boys, favorites of the mobile phone repair market, were the way to go. Easy to insert and remove a chip, but a bit bulky with delicate pins. The cost is in the pins, 16 pins cost double that of an 8 pins socket.
Bus Pirate 5 KF141 Quick Connect Adapter – Right Angle: This accessory makes wiring up sensors to your Bus Pirate 5 “a snap”, with snap-open quick connects that plug into the BP5s header port. Sometimes you just need to connect some wires and dig into a project. Quick connector boards get you working right away.
Stay in the loop at Adafruit.com/New!
Want to get this info beamed straight into your inbox?
New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.
It features new products, special offers, exciting original content, and more.
Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
New nEw NEWs From Adafruit is an email newsletter sent out once a week to subscribers only. It features new products, special offers, exciting original content, and more. Sign-up NOW for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter
