Biohacking: Monitoring the Effects of Holotropic Breathwork

Stanislav Grof came up with the concept of holotropic breathwork in the 1980’s over a decade after his official career of overseeing psychedelic research in government labs had come to an end. Dr. Grof had come to the conclusion that psychedelics were no longer necessary in order to reac hanother state of consciousness. Grof had an extensive background working for both US and Czech based psychiatric centers.

Before I go on to explain how to try a session of holotropic breathwork for yourself let’s start with a disclaimer:

This type of breathing is not for people who are prone to panic attacks, have a history of psychosis or suffer from blood pressure issues, glaucoma and cardiovascular disease. Intense personal emotions can arise.

When getting started with holotropic breathing start with a short session of ten minutes in duration. The first five minutes should be spent laying down and taking deep slow breaths through the nose that cause your belly to rise exhaling completely through your mouth. The second five minutes can be the same thing, but done at a 2x speed. This form of intense breathing quickly becomes exhausting.

I was curious as to what effects on the body could measured with 10 minutes of intense breathwork. Here is what I tested both before and after. I messed up the EEG recording as the contact are difficult to hold when moving.

Within five minutes of following the breath practice I started to feel intense tingling through my body. My legs, arms and chest were intensely vibrating. Near the end I felt very relaxed despite the high effort required to do move this much air through my lungs for ten minutes.

Looking at the data afterwards confirmed that heart rate was as to be expected. It starts out slow and increases with intentional effort during the second half. My urine pH did get slightly more alkaline which agrees with with Wim Hof’s suggestion of breath causing the body to alkalinize. The more interesting shift was a slight drop in blood glucose, an increase in breath acetone and significant uptick in blood ketones from 0.8 mmol/L to 1.3 mmol/L. The blood ketones were a bit of a surprise to see such a rise over a brief period. This will be fun to experiment with in further testing.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.