Biohacking : tACS Transcranial Alternating Current Stimulation Demystified

Brain stimulation using tACS (Transcranial Alternating Current Stimulation) is a somewhat obscure form of cranial therapy. It has been used primarily to treat various forms of depression, insomnia, chronic pain and anxiety. There are few devices on the market that offer “alternating” current while there are many tDCS that offer direct current. tACS has the ability the entrain large neural populations due to its sinusoidal waveform. In the last 11 years tACS has enjoyed rapid growth. In 2007 there was a single clinical study on tACS research and in 2016 there were almost 70 studies.

Disclaimer:

Before we get into some of the advantages, prosumer devices and DIY options for tACS let’s get the disclaimer out of the way. Electrical brain stimulation is so appealing due to its affordability, effectiveness and being relatively safe. However, skin irritation, temporary blindness, itching and potential long term brain changes are all serious concerns. Do not build or use these devices without doing your own research or consulting an expert.

tACS advantages:

  1. time requirement – Treatment sessions can be as short as two minutes and do not need to be longer than five minutes. Other forms of electrical stimulation such as tRNS (random noise) are typically 10 minutes in duration and the more traditional tDCS (direct current) are normally 20 minutes long.
  2. promotes flow – The ideal brain waves for elite athletes to professional programmers occur at 7.5 Hz. This is known as the “flow” state. These brain waves occur at the top of the Theta state (known for it’s dreamy / creative quality) and at the bottom of the Alpha state (known for mental focus). tACS hits guides users to this state more effectively than tDCS or tRNS.

Commercial Devices:

DIY tACS:

References:


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



1 Comment

  1. https://youtu.be/GjA92f_iCHQ

Sorry, the comment form is closed at this time.