Three DIY Photobioreactor Designs for Algae Growing

Growing algae to replace fossil fuel oil was all the rage in 2009. Unfortunately, large scale production of algae can be a complicated process requiring careful nutrient monitoring to avoid crashing the reactor. However, growing algae on a small scale for DIY projects can be achieved using off the shelf controllers and sensors. We are going to briefly review three different DIY Photobioreactors in this post all of which have solved the basics around sensors, temperature control and lighting. Once a successful photobioreactor has been constructed the applications it can be applied to are numerous.

Here are some of the typical uses:

  1. growing chaetomorpha algae for aquarium nutrient management
  2. chlorella and spirulina for as nutritional supplements (high in protein and vitamins)
  3. exotic high value cultures like astaxanthin which is worth more by weight than gold and popular to color farmed Salmon pink. Also commonly used as an anti-inflammatory supplement for people with arthritis.
  4. bioremediation
  5. genetic engineering
  6. space research – absorb CO2 and be a food source

reef-pi


reef-pi is an aquarium controller that is arguably Adafruit’s most EPIC set of guides (7 parts total). This seven part guide has all the essentials for an advanced aquarium setup or algae photobioreactor. The project is controlled using multiple Raspberry Pi modules. The following can be automated using the reef-pi hardware:

  • pH
  • Temperature
  • Water level
  • Lights
  • Nutrient dosing

BioMONSTAAAR


This open source bioreactor has been made available through Instructables and uses a Pi for the primary data collector, but relies on some Arduino components for the sensors and actuators. This is another very meticulously documented PBR.

Pressurized Algae Photobioreactor


This last DIY reactor takes a different approach using a bicycle pump to create a pressurized environment. The final assembly based on a 4.2 gallon plastic carboy is lightweight and somewhat portable. It looks pretty good, but does not compensate for temperature.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.