David Johnson-Davies on the Technoblogy blog builds a machine-code monitor that you program from a hexadecimal keypad using a simplified instruction set. He writes:
It’s a good project for learning about the fundamentals of machine code, and will also appeal to people who like programming challenges. The simplified machine code, called MINIL, is designed to be easy to learn and understand. It’s similar to the Little Minion Computer used in some universities to teach students about machine code. The same method could be used to emulate other simple processors, such as the SC/MP, 6800, 8080, or 6502.
Once you type in the opcode the Tiny Machine-Code Monitor displays the assembler statement alongside it on the display, allowing you to check that it’s what you intended. Because you enter the opcodes in hexadecimal it avoids the need for a full alphanumeric keyboard, while giving you the advantage of seeing the assembler program on the display.
The project is based on the Microchip/Atmel ATtiny85, a small microcontroller with alot of capability (used in the first Adafruit Trinket and Gemma boards).
For the full build details, code, and use see Technoblogy.
(Ed. nice to see work by a fellow 6800 era programmer)
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Adafruit is on Mastodon, join in! adafruit.com/mastodon
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord
CircuitPython – The easiest way to program microcontrollers – CircuitPython.org
New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 9/25/2024 Feat. Adafruit I2S MEMS Microphone Breakout – ICS-43434
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: New CircuitPython Versions, Books Galore and So Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
Adafruit IoT Monthly — IoT Vulnerability Disclosure, Decorative Dorm Lights, and more!
Maker Business – Adafruit Daily — A look at Boeing’s supply chain and manufacturing process
Electronics – Adafruit Daily — When do I use X1?
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at
AdafruitDaily.com !
No comments yet.
Sorry, the comment form is closed at this time.
