Adorable UPS costume complete with truck — ready to deliver your Adafruit goodies!
shared by Prasad Silva on YouTube:
Materials:
- – Cardboard boxes, glue, clamps, painters tape, brown paint from Home Depot
- – Trinket M0, NeoPixel 12 (x2) and 16 (x2) rings, solid hookup wires, wire connectors, illuminated latching switches from Adafruit
- – Decals printed on a regular inkjet printer on regular printer paper and glued on
Notes:
– I popped one of the illuminated latching switch LEDs because I assumed both switch LED’s had the same 3V forward voltage. The orange one was 2.2V.. Reminder: Always read ALL datasheets!
The code on the Trinket is very simple. Configure a 24 light strip for the blinkers (pin 0) and a 32 light strip for the headlights (pin 1). The headlights were set to be constant white and the blinkers switched between black and amber every 500ms.
Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!
Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards
Adafruit is on Mastodon, join in! adafruit.com/mastodon
Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.
Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7:30pm ET! To join, head over to YouTube and check out the show’s live chat and our Discord!
Join us every Wednesday night at 8pm ET for Ask an Engineer!
Join over 38,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord
CircuitPython – The easiest way to program microcontrollers – CircuitPython.org
New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — New Products 9/25/2024 Feat. Adafruit I2S MEMS Microphone Breakout – ICS-43434
Python for Microcontrollers – Adafruit Daily — Python on Microcontrollers Newsletter: New CircuitPython Versions, Books Galore and So Much More! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi
EYE on NPI – Adafruit Daily — EYE on NPI Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey
Adafruit IoT Monthly — IoT Vulnerability Disclosure, Decorative Dorm Lights, and more!
Maker Business – Adafruit Daily — A look at Boeing’s supply chain and manufacturing process
Electronics – Adafruit Daily — When do I use X1?
Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at
AdafruitDaily.com !
No comments yet.
Sorry, the comment form is closed at this time.
