EYE on NPI – TE Board-Mount Reflow Terminal Blocks #EyeOnNPI @DigiKey @TEConnectivity

This week’s EYE ON NPI (video) is gonna be a hit for anyone who has ever had to add terminal blocks to a design, then dealt with the frustrations and costs of having a mixed SMT/THM process. Presenting… TE Connectivity Board-Mount Surface Mount Reflow Terminal Blocks. Yes!

Almost everyone has created a design that had a raw-wire to board connection. And a super popular way to make a flexible but durable connection with a range of wire thicknesses is to use the tried-and-true Terminal Block.

Digi-Key carries thousands of different terminal blocks in all sizes, pitches and configuration. Multiple rows! Plug type! But they all tend to be through-hole type. Not surprising, because there’s a lot of mechanical torque on the connector when twisting, and also a lot of current passes through these connectors – they’re often used for power supplies, and motors, that can draw amps.

Given that they are through hole, a selective, manual or wave-soldering step is required for manufacture. And believe us, while these machines are totally awesome – they also require a lot of maintenance and time to run. So we try very hard to go with SMT-only processes: it’s a lot faster and cheaper to only use one machine than to use two machines where boards have to move through two machines.

We’ve used some “SMT Terminal blocks” before in products like on our Buckaroo Bonsai, which only needs 2 wires connected, and low power ones at that. Since hauling all the PCBs to the selective for just two pins is a total pain, we figured its better to go with this ‘side insert’ type. It works fairly well but doesn’t have the adjustability we love with the cage-type terminal blocks.

Which is why we are diggin’ this series from TE, available in various pitches (3.5mm, 3.81mm or 5mm) and pin counts, from 2 to 7 pins. They look just like your everyday terminal blocks, but with flat rectangular pads that are bend 90 degrees to the back of the package, and mechanical shear/locating dots that will keep the connector from lifting up. They’re even packaged in a chunky tape and reel, ready for use in your machine line. Note that even with the locator posts and large pads, you’ll still want to make sure that you don’t have a lot of force coming in from the front: The posts will protect against torque from the top but probably can’t help much if they are lifted up from the front.

If you only need a couple terminal blocks in your design and want to save process costs – or if there’s a reason you can’t go with a through-hole block – these TE Board-Mount Reflow Terminal Blocks will do great. And, they’re available and in stock at Digi-Key right now! Order today for immediate delivery, so you can be twistin’ and terminatin’ by tomorrow afternoon.


Adafruit publishes a wide range of writing and video content, including interviews and reporting on the maker market and the wider technology world. Our standards page is intended as a guide to best practices that Adafruit uses, as well as an outline of the ethical standards Adafruit aspires to. While Adafruit is not an independent journalistic institution, Adafruit strives to be a fair, informative, and positive voice within the community – check it out here: adafruit.com/editorialstandards

Join Adafruit on Mastodon

Adafruit is on Mastodon, join in! adafruit.com/mastodon

Stop breadboarding and soldering – start making immediately! Adafruit’s Circuit Playground is jam-packed with LEDs, sensors, buttons, alligator clip pads and more. Build projects with Circuit Playground in a few minutes with the drag-and-drop MakeCode programming site, learn computer science using the CS Discoveries class on code.org, jump into CircuitPython to learn Python and hardware together, TinyGO, or even use the Arduino IDE. Circuit Playground Express is the newest and best Circuit Playground board, with support for CircuitPython, MakeCode, and Arduino. It has a powerful processor, 10 NeoPixels, mini speaker, InfraRed receive and transmit, two buttons, a switch, 14 alligator clip pads, and lots of sensors: capacitive touch, IR proximity, temperature, light, motion and sound. A whole wide world of electronics and coding is waiting for you, and it fits in the palm of your hand.

Have an amazing project to share? The Electronics Show and Tell is every Wednesday at 7pm ET! To join, head over to YouTube and check out the show’s live chat – we’ll post the link there.

Join us every Wednesday night at 8pm ET for Ask an Engineer!

Join over 36,000+ makers on Adafruit’s Discord channels and be part of the community! http://adafru.it/discord

CircuitPython – The easiest way to program microcontrollers – CircuitPython.org


Maker Business — “Packaging” chips in the US

Wearables — Enclosures help fight body humidity in costumes

Electronics — Transformers: More than meets the eye!

Python for Microcontrollers — Python on Microcontrollers Newsletter: Silicon Labs introduces CircuitPython support, and more! #CircuitPython #Python #micropython @ThePSF @Raspberry_Pi

Adafruit IoT Monthly — Guardian Robot, Weather-wise Umbrella Stand, and more!

Microsoft MakeCode — MakeCode Thank You!

EYE on NPI — Maxim’s Himalaya uSLIC Step-Down Power Module #EyeOnNPI @maximintegrated @digikey

New Products – Adafruit Industries – Makers, hackers, artists, designers and engineers! — #NewProds 7/19/23 Feat. Adafruit Matrix Portal S3 CircuitPython Powered Internet Display!

Get the only spam-free daily newsletter about wearables, running a "maker business", electronic tips and more! Subscribe at AdafruitDaily.com !



No Comments

No comments yet.

Sorry, the comment form is closed at this time.